Led strips bathroom
How to Choose Waterproof LED Light Strips for Pool, Bathroom, etc.
Q: I would like a waterproof LED strip light, but how can I identify if an LED strip light is waterproof?
A: Generally speaking, when you’re purchasing an LED strip light, you can see its level of waterproofing on the part that presents the product details. Overall, it is mainly divided into non-waterproof, waterproof against drops and splashes, and completely waterproof.
IP20 basically represents that it is not waterproof, suggesting that you not use it indoors where it could get wet with water.
IP65 and IP66 indicate that it is semi-waterproof, so you can put it under water and wash it, but you cannot soak it in water constantly.
IP67 indicates that it is waterproof; you can immerse it in water for a short period of time outdoors.
IP68 indicates that the level of waterproofing is higher and that you can immerse it in water for a long time.
If you are only using it indoors, there are water drops and splashes, and so a waterproofing level of IP65 basically is good enough. If you would like to install it in a place where it will be submerged in water for a long time, then we suggest that you utilize an LED strip light with a level of waterproofing of IP68.
Part 1. When Do We Need Waterproof LED Strip Lights
Part 2. How to Install Waterproof LED Strip Lights
Part 3. Why Choose Lepro Waterproof LED Strip Lights
Part 4. Understanding the IP Protection Level
Part 1. When Do We Need Waterproof LED Strip Lights?
How to discern whether or not we need to purchase waterproof LED strip lights? It’s mainly based on the location where you install them.
As far as indoors, if you’d like to install the LED strip lights in your bedroom, living room, or all around some furniture as background lights, then you basically don’t need the waterproofing feature. You can just directly purchase non-waterproof LED strip lights; this way, you won’t need as much of a budget, either. If you’d like to install them in your kitchen, bathroom, or other places where often there are splashes of water, we suggest that you purchase strip lights with a protection level of IP65.
If you want to ask whether or not you need to purchase strip lights with a protection level of IP67 or even IP68, my suggestion is that there isn’t so much of a need for that; unless you need to constantly soak the strip light in water, generally it’s relatively rare indoors.
If you are getting ready to install the strip lights in a swimming pool, fish tank, and other places directly immersed under water, or to install them outdoors directly exposed to the outside, it might be able to withstand getting soaked under heavy rain for a long time, and we suggest that you go ahead and purchase strip lights with the highest protection level, IP68. If they’re outdoors but there are some coverings and they won’t be soaked for a long time in water, then you can also just purchase LED strip lights with a bit lower of a protection level.
Part 2. How to Install Waterproof LED Strip Lights
There are different categories of LED strip lights, such as 12V LED strip lights and 120V LED strip lights, and their methods of installation differ.
Let’s take the Lepro LED 12V strip light for instance and teach you how to install waterproof 12V LED strip lights indoors. Actually, if you purchase non-waterproof LED strip lights, the installation process is also the same.
Step 1. Clean walls/object surfaces
No matter whether you’d like to install the LED strip lights onto the ceiling of your bathroom, the bottom of your bathtub, or behind your mirror, the very first step is to ensure that the surface is dry and clean. Otherwise, the 3M super glue on the back of the LED strip light will not be able to adhere to where you’d like to install it.
Step 2. Tear off the 3M super glue, and stick on the strip light
After cleaning up, you can go ahead and tear off the 3M super glue on the back of the LED strip light and stick the strip light onto the location that you have chosen. After sticking it on, if there is an excess portion, you can use scissors to cut the strip light where there are cutting marks. You can also take measurements before sticking it on, preparing a strip light of a suitable length before then sticking it on.
Step 3. Connect the strip light and the controller
If you have purchased a strip light set, there will be illustrations inside of the connector, helping you to connect your strip light and controller. The other end of the controller connects to the power.
Step 4. Hook up to power, illuminate the strip light
The last step is to hook the controller up to the power, and then you can use the remote control to light up the strip light.
If you are worried that the strip light will not be able to stick to the wall due to water soakage, then you can use the strip light securing clip to affix it. If you would like to learn how to install waterproof LED 120V strip lights, you can click to check out more information.
Part 3. Why Choose Lepro Waterproof LED Strip Lights
In the market, there are many waterproof LED strip lights. Why choose Lepro?
First of all, Lepro is a brand that has been working tirelessly for over ten years as an LED illumination business, and our control over product quality is especially rigorous, devoting our energies to allow people to enjoy the coolest illumination experiences, and we are extremely popular with consumers thanks to the outstanding quality and reasonable pricing of the products under our brand.
Second of all, there is quite an abundance of Lepro LED strip light product types, satisfying various demands. Besides whether or not you need waterproofing features, the LED strip lights have even more features that you can choose from, such as there being a single color or RGB color, being able to manipulate the smart controls with your cell phone, following the beat of music, and the like, all of which can be customized at will according to your needs. If you so require, you can click on and check out the LED strip lights categories to find out more.
Apart from this, Lepro values user experience very much. Besides providing professional customer service, if you are not satisfied with a product, you may return it for a refund within 30 days.
Part 4. Understanding the IP Protection Level
IP protection levels consist of two numbers. The first number indicates the light’s level of dustproofing and prevention of penetration by foreign objects. The second number indicates the light’s degree of moisture proofing and of airtightness in preventing penetration by water.
The higher the number is, the higher its protection level is.
| Dustproofing Level | Waterproofing Level | |
| 0 | No Production | No Production |
| 1 | Prevents large solids from entering | Unaffected by water droplets dripping onto the outer covering |
| 2 | Prevents medium-sized solids from entering | Unaffected by water droplets dripping onto the outer covering when the outer covering tilts at 15 degrees |
| 3 | Prevents small solids from entering | Prevents splashing water from seeping in |
| 4 | Prevents solids larger than 1mm from entering | Prevents sprayed water from seeping in |
| 5 | Prevents harmful dust from accumulating | No damage whatsoever if you wash it with water |
| 6 | Completely prevents dust from entering | Prevents big waves from seeping in |
| 7 | Can be used to resist penetration by water for short periods of time | |
| 8 | Soaks for a long time under a certain amount of pressure |
Bathroom Lighting - Add a Splash of Colour with our LED Strip Lights – LEDSpace
Skip to contentGET A QUOTESHOP NOW
Bathroom lighting inspiration
Ceiling & Coving
Walls
Shelving
Steps & Plinths
GET A QUOTESHOP NOW
16+ million hues of possibility
Colour Changing
GET A QUOTESHOP NOW
Relaxing white tones to cool white, make-up ready
Adjustable White
GET A QUOTESHOP NOW
Control your lighting with a wall switch, app, smart device or a combination of all
Press.
Touch. Swipe. It's up to you
GET A QUOTESHOP NOW
Seamless Easy Packs
Ready-Made Lighting Systems for Hassle-Free Installation.
View Seamless Easy Packs by:
Controls:
- Smart Wall Switch
- SmartPhone App
- 240V Dimming
- On/Off Switch
- Remote
- Zigbee
Colour:
- RGB Colour Changing
- Natural White
- Warm White
- Cool White
Length:
- 3m
- 6m
- 9m
VIEW ALL PACK OPTIONS
28+ Years experience in lighting up everything from multi-nationals to home DIY projects
The Lighting Experts
⭐⭐⭐⭐⭐
Robert Taylor
10/10/2022
Great products and service to back them.
Great products and service to back them.
LEDSpace
Tomasz Hejnowicz
10/10/2022
Top notch
Very good products. Great customer service. Immediate response.
LEDSpace
Gary Elstone
10/10/2022
LED space
First time I have used this company and was recommended by a friend.
The service is excellent and informative, kept up to date your order and was delivered in good order and on time.
LEDSpace
Lynn McGarry
10/08/2022
Excellent customer service
I received an immediate helpful reply to me emailed question. I think that's the selling point of this company - they'll help you with putting your kit together. Also it arrives very quickly and is good quality - this is why they're a bit more expensive than others though. You pay for what you get.
LEDSpace
Monika Basinska
10/06/2022
Cheltenham -Monika
Very helpful and patient with all questions . I had a pleasure to deal with Shaun who was very knowledgeable what did help me a lot with making my decision . He also sorted out delivery problem for us immediately. It just felt like we were in good hands and nothing was to much with support. I cant wait when all our LED strips are going to be connected and we can enjoy all .
Thank you guys
LEDSpace
Richard Thomas
10/04/2022
Outstanding
I was passed the details of this product by another trader like myself .
I emailed this company and Jake replied and quoted for the details I gave him . The product was spot on ! Outstanding product and quality product compared to others . I have another project in mind straight after and I will be back again .
SPLASh20! LED | 24V | 2700K
Ben Rivers
10/03/2022
Fantastic service!
Great service, super helpful in advising the correct bits needed, arrived quickly. Adrian, you are a legend. Thank you so much. 100% recommended.
LEDSpace
Alex
09/27/2022
Great service
Had an issue with some parts. The team was quick to respond and helped us to resolve the issues we were having, allowing us to still meet the deadline.
LEDSpace
Matt
09/23/2022
High quality product
Easy to install, great customer service...
Seamless10 Adjustable White CCT LED Strip | 24v | 14w
Gary Collins
09/20/2022
Friendly efficient service.
Nothing is too much trouble for these people
Seamless10 Cool | 9w | 24v LED Strip Lights
Mark Shearman
09/18/2022
Retro Fit.
Excellent customer service. Answered my question and very quickly made up a bespoke order which made it very easy to order. Products arrived very quickly and were of very good quality. Easy to install and the end resu?t is exactly what I wanted.
Seamless10 Natural | 9w | 24v LED Strip Lights
Neil
09/18/2022
All good!
Very pleased with the product and customer service. This is my second purchase to finish the kitchen lighting. Will definitely be returning if I need any more!
Seamless10 Natural | 9w | 24v LED Strip Lights
Ian Houghton
09/18/2022
Excellent Service
Was initially disappointed to find that enquiries had to be made by email and not by phone. The email was answered quickly and the products when ordered arrived next day. Very happy
LEDSpace
Desmond Alfred
08/23/2022
Fantastic daylight lighting
Worked well in bathroom bespoke unit.
Seamless10 Warm | 9w | 24v LED Strip Lights
Bob Hart
08/18/2022
Great service
Great LED strips and Shaun was very helpful with advice for my Lantern design.
Overall affect is stunning now
96 LED RGB+Cool White LED Strip Lights | 96 LED | 24V | 20W
GET A QUOTEREAD ALL REVIEWS
GET A QUOTESHOP NOW
X Your cart
You have no items in your shopping cart.
`;var xoMoneyFormat = "£";var xoMultiLang = true; var xoDfLang ="en";var xogMoneyFormat = `£{{amount}}`;LED strip in the bathroom - features of use and installation
There are a lot of rooms in our house where you can make original lighting. However, some of them really need it. The bathroom is one of these rooms. As you know, the main purpose of this place is to wash your body.
And in the event that the lighting of certain places is poor, that is, there is some darkness, then this process can be carried out poorly. nine0005
Another purpose of the bath is to provide physical and mental relaxation. You can enhance the feeling of rest and relaxation with the help of light of a certain color.
Various sources can create this light, but one of the best sources is the LED strip.
It is thanks to the LED strip that it is possible to ensure that subdued and soft light of a certain color is supplied to different corners of the bathroom. In addition, it can provide reliable and high-quality lighting of certain parts of the room. nine0005
Summing up the above, it can be noted that the LED strip in the bathroom can provide the following types of lighting:
- Functional.
- Decorative.
In the following, we will consider the features of installation and use of LED strip in the bathroom. However, first we note what conditions are observed in the bathroom, and what properties an LED-type tape must have in order to be safe to use.
Bathroom lighting features
As you know, the bathroom is the place where there is a lot of water. And everyone knows well that it is water that is the main enemy of electricity and electrical devices.
- Using LED strip in the bathroom floor
- Decorating mirrors with LED strips
- Mirror decorated with LEDs nine0034
- LED floor lighting
- Ceiling lighting with LED strip
- Decorative lighting with LED strips
[sc name=img ]
The presence of a large amount of water and steam is the main feature of the bathroom.
At the same time, in some places of the bath there is a high probability of direct contact of water with a lighting fixture (in our case, an LED strip). nine0005
Of course, such contact can lead to a short circuit or electric shock to people who are in the bathroom. In order to avoid such a scenario, only those LED strips that are water resistant should be used in this room. That is, they must be sealed.
As already noted, in the event of contact with water, a person is exposed to serious danger. In order to minimize this danger, experts recommend using lighting fixtures that operate at low voltage. nine0005
As you know, the LED strip can operate at 12- and 24-volt voltage. This voltage is safe for humans. Of course, it will be better if you use a 12-volt LED strip.
It is worth mentioning another feature of this type of premises. It lies in the fact that not every place in the bath can get water. That is, in some it may be, and in some it may not be.
Here it is appropriate to recall the four zones of humidity.
At the same time, we will also note which LED strip should be used for them. nine0005
Bath zones and types of LED strips for them
The first and most important is the zone that houses the bath, shower and sink. There is a constant presence of water here. And if you mount an LED light source in this place, then it will constantly be in contact with water.
Waterproof LED strip
[sc name=img ]
In this case, it is best to use those strips that have IP67 and IP68 protection. This protection consists in the presence of continuous sealing. nine0042 It is worth noting that the IP67 marked LED strip can withstand temporary immersion in water.
As for the tape marked IP68, it can be submerged under water for a long time. True, the loading depth should not exceed one meter. As for their use, the first one can be used to effectively illuminate a washbasin (can be installed above it) or a bathtub. LED strip with IP67 protection is mounted on the upper edge of the bathtub and on its outer sides.
If we talk about the IP68 LED strip, then it can be installed on the inner walls of the bath. Such use can be called purely decorative. nine0005
The second zone is the area around the bath, shower or washbasin. Its space is 60 centimeters around the aforementioned items. Water often enters this area as well.
But, it looks like small drops and sometimes streams. Here it is advisable to use a tape marked IP67. The height of the first two zones usually does not exceed 2.25 meters.
The third zone is the space that is located at a distance of 60 centimeters from the edge of the bathtub or washbasin. Only drops of water can get into it. nine0005
Tape labeled IP65 or IP67 can be used to create LED lighting in this part of the bathroom. IP65 LED strip is sealed on one side only. The insulation covers the LEDs, contacts and all other items that are on top of the PCB.
The fourth zone is a space that is located at a distance of 3 meters from the water source.
Only steam and condensate can accumulate here. A possible option is to use an LED strip with IP65 protection. nine0005
Ceiling lighting
LED strips can also be mounted under the bathroom ceiling, around or behind a mirror, on furniture, shelves and walls. At the same time, ribbons of surface glow are used to illuminate the ceiling, mirrors and shelves. They are mounted in such a way that the eye does not see them.
So, if the ceiling is illuminated, the LED strip is hidden behind the ceiling plinth. This plinth should be on the wall and the distance to the ceiling should be five centimeters. The plinth can be plastic or aluminum and must be fastened with self-tapping screws. nine0005
Mirror lighting
Bathroom mirror lighting
[sc name=img ]
Ceiling lighting with LED strip is a decorative bathroom lighting and is not very popular. More in demand is the backlight of the mirror.
To create it, the LED strip is installed on the back of the mirror.
Of course, the installation is carried out along the edges of the back. Some experts note that a power supply can also be placed behind the mirror. In this case, the mirror should be at a distance of 5 centimeters from the wall. This block must be protected from moisture. nine0005
Helpful Hint: A much better and more importantly safe option is to mount the power supply outside the bathroom. In general, you should make sure that the bathroom has as few electrical devices and components as possible.
That is, all power supplies, controllers and RGP amplifiers, as well as switches, are best placed outside this type of room.
If the power supply is mounted outside the bathtub, the mirror can be placed two centimeters from the wall. The source must emit white light. nine0005
It is also possible to mount the LED strip on the walls.
Installation sequence
Now let's move on to the very process of creating LED backlight. In the event that you plan to use only a white LED strip, then you need to stock up:
- power supply;
- with the tape itself;
- wires;
- connectors.
If you plan to organize colored lighting, then you need to purchase a controller and if you use more than five meters of tape, you need to stock up on an RGB amplifier. nine0005
Before purchasing these elements, you need to determine the total length of the desired ribbon and its total capacity. The total power of such LED lighting is determined by multiplying the power of one meter of the ribbon (this value is indicated on the ribbon itself) by the required number of meters.
In the event that the total length of the LED strip is more than five meters, then you need to stock up on an additional power supply.
Helpful Hint: One block per five meters of tape is allowed. Its power should be 50 percent greater than the power of our light source. nine0005
The connection of these blocks to the general network, as well as individual pieces of tape to the blocks, is carried out in parallel. Such a connection is easier to make using special connectors.
Connection sequence is as follows:
Electrical network → power supply → LED strip.
If the source has colored LEDs, then this strip is connected to the controller.
The first two elements are mounted outdoors with a bathroom. Next, install the tape in the right places. These places need to be cleaned of dirt and degreased. Then LED strip is glued on them. Later, with the help of wires, it is connected to a controller or a current source with a 12-volt voltage. nine0005
Video. An example of organizing LED bathroom lighting:
What do you need to know about waterways? Design of any room: an overview of styles and their features Development and production of ventilation equipment Favorable cooperation with Chinese factories
LED bathroom lighting
The bathroom occupies an important place in the life of a modern person. Daily hygiene procedures are more pleasant to carry out in a comfortable environment, with good and well-executed lighting.
Lighting, even in a small and compact room, should be mounted according to needs. The ideal solution could be "zoning" - the division of lighting fixtures into main and target ones. nine0005
Main lighting installation
Most bathroom procedures require bright and evenly distributed lighting. Arlight LED panels and Arlight LED luminaires will successfully fulfill this task. Economical and environmentally friendly, these lighting fixtures provide the right level of illumination.
A good solution to the bathroom lighting problem can be Arlight LED strips. The specific choice of lighting fixtures for the main lighting depends on the type of bathroom ceiling. nine0005
Spot light for mirrors
For cosmetic procedures, shaving, applying makeup, an important assistant is a mirror. In order for it to reflect the real picture of the face, without distortion and extraneous shading, it is important to install it correctly. But the small dimensions of the bathroom and its workload often do not allow choosing the most convenient place for the mirror in terms of illumination.
A good solution in this case would be LED illumination of the mirror zone. nine0005
To properly create local lighting near the mirror, you should leave a gap between it and the wall of at least 50 mm. The Arlight power supply will be placed in this gap. Arlight LED strip (preferably white) is glued around the perimeter of the mirror, from the inside. In this way, you can ensure uniform illumination of the face without glare and shadows.
Decor with lighting
Decorative lighting serves to create coziness and mood when taking a relaxing bath or invigorating shower. It does not affect the overall illumination and is created as an element of the interior. You can use the Arlight RGB strip for this purpose, which allows you to choose the color of the lighting depending on the mood or time of day. nine0005
Most often, for decorative lighting in the bathroom, the least loaded functional surface is used - the ceiling or decorative niches. It is possible to decorate with the help of illumination of bathroom furniture items.
Safety concerns
The development of modern technologies provides a rich selection of lighting fixtures, including those suitable for rooms with high humidity. When installing lighting and other electrical appliances, do not forget about the danger of electric shock or short circuit, which increases with the presence of moisture in the air. nine0005
Due to the low voltage applied to Arlight LED lights and Arlight LED strips (12V, 24V), they are relatively safe on their own. For additional protection in areas where water jets (splashes) can get in, you can use the sealed Arlight LED strip (class IP65, IP67). It is worth taking care of Arlight sealed power supplies. The main risk area, from the point of view of electrical safety, is the junction of electrical wires that are energized with 220 V and the Arlight power supply. In this place of isolation, special attention should be paid, and even better, take the Arlight power supply outside the bathroom.
nine0005
For maximum protection of a person from electric shock, increasing the degree of fire safety of the room, experts recommend installing an RCD (residual current device) on any electrical equipment in the bathroom.
And most importantly: the installation and connection of the lighting system in the bathroom and other hazardous areas should only be carried out by experienced professionals.
Products related to the article
| Sealed LED strip RTW 12V 60 led 3528 Housing: Closed Sealed LUX tape on a white board, 3M adhesive tape. LEDs smd 3528 300pcs, coil 5m. Power supply DC 12V, max current 2A, power 24W. Tape SE silicone coating IP65 (protection against dust and splashes) - dimensions WxHxL 8x2.2x5000 mm and PGS tape in a silicone tube with sealant IP67 - dimensions WxHxL 11x5x5000 mm nine0216 | |
| Sealed LED strip RTW 12V 2х 120 led 3528 Housing: Closed 2X sealed LUX tape on a white board, 3M adhesive tape. | |
| Sealed LED strip RTW 24V 2х 120 led 3528 Housing: Closed Sealed LUX tape on a white board, 3M adhesive tape. LEDs smd 3528 600pcs, coil 5m. Power supply DC 24V, max current 2A, power 48W. Tape SE silicone coating IP65 (protection against dust and splashes) - dimensions WxHxL 8x2.2x5000 mm and PGS tape in silicone tube with sealant IP67 - dimensions WxHxL 11x5x5000 mm nine0005 | |
| Sealed LED strip RTW 24V 2x2 240 led 3528 Housing: Closed 2X2 sealed tape LUX on a white board, 3M adhesive tape. LEDs smd 3528 1200pcs, coil 5m. Power supply DC 24V, max current 4A, power 96W. Tape SE silicone coating IP65 (protection against dust and splashes) - dimensions WxHxL 16x2. | |
| Sealed LED strip RTW 12V 30 led 5060 Housing: Closed Sealed LUX tape on a white board, 3M adhesive tape. LEDs smd 5060 150pcs, coil 5m. Power supply DC 12V, max current 3A, power 36W. Tape SE silicone coating IP65 (protection against dust and splashes) - dimensions WxHxL 11x2.4x5000 mm and PGS tape in silicone tube with sealant IP67 - dimensions WxHxL 13x5x5000 mm nine0005 | |
| Sealed LED strip RTW 12V 2х 60 led 5060 Housing: Closed 2X sealed LUX tape on a white board, 3M adhesive tape. LEDs smd 5060 300pcs, coil 5m. Power supply DC 12V, max current 6A, power 72W. Tape SE silicone coating IP65 (protection against dust and splashes) - dimensions WxHxL 11x2.4x5000 mm and PGS tape in silicone tube with sealant IP67 - dimensions WxHxL 13x5x5000 mm nine0005 | |
| Sealed LED strip RTW 24V 2х 60 led 5060 Housing: Closed 2X sealed LUX tape on a white board, 3M adhesive tape. 
|
LEDs smd 3528 600pcs, coil 5m. Power supply DC 12V, max current 4A, power 48W. Tape SE silicone coating IP65 (protection against dust and splashes) - dimensions WxHxL 8x2.2x5000 mm and PGS tape in a silicone tube with sealant IP67 - dimensions WxHxL 11x5x5000 mm nine0005 
2x5000 mm and PGS tape in silicone tube with sealant IP67 - dimensions WxHxL 22x5x5000 mm nine0005 
